The most common and simple solutions for ceiling finishes are wallpapering, installing polystyrene tiles or conventional painting. All these finishing methods have a common feature – the ceiling surface must first prepare (dug up, level and primed). You can hire professionals on the one hand, but if you have general ideas about the treatment of spatula and trowel, then all the stages – from the preparation of ceilings to finishing – are quite capable of performing yourself.
Without special difficulties, the installation of hinged or rack ceilings is also performed. Such a solution can be optimal for the toilet with the bathroom and the corridor. You may have some problems when performing electrical work – if, for example, you decide to install built -in lamps in the ceilings. The most “clean” technology that allows you not to think about plastering ceilings and diversify all options in the decoration of the premises – these are of course, stretch ceilings, which are more difficult and more expensive, but are available for installation on their own.
Stretch ceilings are most easily mounted in rectangular rooms. At the same time, baguette rails are fixed around the entire perimeter of the premises. After that, with a hairdryer or heat guns, you need to warm up the fabric of polymers and install it on the frame frame. When cooling, the ceilings will stretch and form even surfaces. Sometimes it is required to repair automobile air conditioners, which may simply consist in refueling the air conditioner with a freemon or replacing an air filter.